Quilt Qua

This is an excerpt taken from an interview with Dierdre McElroy, expert hand quilter: 

 

Penny: How can you find a good thread?

 

Diedre: No, there really isn’t. Feel the thread. Nine-tenths of the time, what you would instinctively want to stay away from is actually the better thread, because you’ll feel it and it will feel like wire. Never pay attention to weight on thread. Weight is a page-long calculus formula that is unique to every single company.

If you like using a 50 weight Mettler, you can’t use a 50 weight Gutermann because they’re like apples and oranges. They don’t compare. Weights in general are not something people want to pay attention to.

If the manufacturer says it’s quilting thread, then you know it will be strong enough for quilting. But then feel the thread. If it’s nice and stiff or it says “glaced,” “waxed,” “glazed,” or any other fancy term they come up with, more than likely it will be a little better.

I’m not doing any quilting right now because the only thread I would use up until six months ago was YLI’s hand-quilting thread that was on a wooden spool. It was the only thread left on the market that was built with a right twist and heavily glazed. It was just a dream to quilt with.

 

 The company was the only one left in the industry that was still dyeing their threads in the United States. Unfortunately, the new laws with chemicals have really been harsh on them and they’ve had to outsource to another country. A mistake happened in their dyeing process, so their threads are now bleeding into the quilts.

 

Penny:            That’s not good.

 

Diedre:           Even though their construction is amazing for hand quilting, we have that bleeding problem. There is no other thread on the market right now that is constructed in a way that I would like for my personal hand quilting.

 

            When this bleeding problem happened, I went straight to Superior and said, “You guys are the biggest. You actually know what you’re doing with construction.” I have been working with them for a couple of years to try to convince them that there are enough hand quilters out there to make a thread specifically for hand quilting.

 

            They finally listened. As of yesterday, I have a final prototype on my desk to test. Hopefully, we’ll get something out there that is really going to be nice for hand quilting. In the interim, just look for the most heavily glazed quilting thread you can find. Don’t try to use it in your sewing machine because it will really gum up the inside of the machine.

 

Penny:            The finish of the thread wears off when it goes through the machine.

 

Diedre:           Exactly. It wears off or gums up the machine, depending on what they’ve used. They really don’t cross over.

 

Penny:            For beginning quilters, if you’re having trouble with hand quilting, maybe it’s the thread that’s causing the problems and not the fact that you’re a beginning hand quilter.

 

Diedre:           The problem with beginner hand quilters is we don’t want to spend a lot of money on stuff when we know we’re not going to be producing really quality quilts in the beginning. We usually run to Wal-Mart or Jo-Ann’s and just buy something that will get us through while we’re learning. All of us have done it. I did it.

 

            If it were any other industry, it wouldn’t be a problem. But for some reason, quilters never think to blame the product. If this was a drill or bench saw, men would blame the bench saw.

 

            Quilters always blame themselves. They think, “Maybe I’m not cut out to be a hand quilter. I’m not dexterous. I’m not creative. I’m not artistic.” I’ve heard every excuse known to man. They never think the thread alone could be a problem, but it really can.

 If the thread is not pulling through the quilts, it’s knotting up or fraying and breaking at the eye of the needle, that’s so frustrating. Everything starts to go wrong because you’re frustrated. Your muscles tighten up and it blows the whole thing.

Penny: It doesn’t help if you cut the thread off the spool and thread it the reverse way?

Diedre: No, that’s a wives’ tale. A long time ago, there were some threads that would have a nap to them. They’d wind it on the spool and all the little fuzzies would start to go in one direction. Somebody went far enough to figure that out and say, “If you always thread the needle with the end that came off the spool last, the fuzzies will be going in the right direction.”

 The problem is, the way they wind spools in the factories overseas, for speed, one spool goes up and clockwise and the next one goes down and counterclockwise. You never know what you’re getting unless you analyze each individual spool under a microscope to figure out where the nap is.

 
There aren’t really naps to threads anymore. If you find a glazed thread, nap no longer matters. Don’t worry about which end you’re threading.

  

Happy Quilting!

Penny is the author of 9 books for beginner quilters and a self-taught quilter of more than 25 years who seeks to interest new quilters and provide them with the resources necessary to create beautiful quilts.

www.How-to-Quilt.com
Specializing in Information for Beginning Quilters

www.TheQuiltingCoach.com
Where Quilters Connect

www.Rag-Quilt-Instructions.com
Fast, Fun and Funky Quilts

www.Fabric-Postcards.com
Quilt Greetings Across the Miles

 

This article courtesy of http://www.How-to-Quilt.com.
You may freely reprint this article on your website or in your newsletter provided this courtesy notice and the author name and URL remain intact.

©2007, Penny Halgren